Carbide Insert Tip Blade 11mm 12mm Rounded Square Negative Rake for Wood Turning UK
They measure 11.6mm
11mm Square Carbide toolholders are made by a few of our suppliers. My set is from Rutlands K10 Carbide Mini.
I have had messages from customers who have these toolholders in their sets asking for 11mm Square Negative Rake tips.
I CANNOT obtain 11mm Square Negative Rake Tips i have tried many times. This is the nearest i can get.
I use these 12mm Tips with a 0.5mm Shim Washer under the tip as a small spacer
They actually measure 11.6mm so may fit your set directly but if they dont you could add a small shim washer of 0.5mm or 1mm under the tip just to raise it slightly.
These tips are a bit pricey compared to others but on only bought 5 to try. Price may come down a bit if i buy 10
Replacement Carbide Tips for Woodturning Chisel
12mm X 12mm Rounded 50mm Radius Square 2.2mm Thick.
35 degree Cutting Bevel
Negative Rake
M4 Hole
with 0.5mm & 1.0mm Shim washer
Suitable screws are:-
M4 x 8mm CSK Torx Screw (Head sits flush with top of the cutter)
M4 x 8mm CSK Reduced Head Torx Screw (Head sits above cutter top but can be used with other cutters)
They measure 11.6mm
11mm Square Carbide toolholders are made by a few of our suppliers. My set is from Rutlands K10 Carbide Mini.
I have had messages from customers who have these toolholders in their sets asking for 11mm Square Negative Rake tips.
I CANNOT obtain 11mm Square Negative Rake Tips i have tried many times. This is the nearest i can get.
I use these 12mm Tips with a 0.5mm Shim Washer under the tip as a small spacer
They actually measure 11.6mm so may fit your set directly but if they dont you could add a small shim washer of 0.5mm or 1mm under the tip just to raise it slightly.
These tips are a bit pricey compared to others but on only bought 5 to try. Price may come down a bit if i buy 10
Replacement Carbide Tips for Woodturning Chisel
12mm X 12mm Rounded 50mm Radius Square 2.2mm Thick.
35 degree Cutting Bevel
Negative Rake
M4 Hole
with 0.5mm & 1.0mm Shim washer
Suitable screws are:-
M4 x 8mm CSK Torx Screw (Head sits flush with top of the cutter)
M4 x 8mm CSK Reduced Head Torx Screw (Head sits above cutter top but can be used with other cutters)
Product Code: 12RSQNR
Brand: Generic
Product Condition: New
weight: 2.0g
Updating Order Details
Please do not refresh or navigate away from the page!
No Reviews Posted Yet - be the first!
